MCQ Bank
In Windows 7 or Windows 10 operating system, you will go to _______________ settings to assign the IP address to the computer.
- A) Change IP
- B) Change LAN
- C) Change devices
- D) Change adapter
In windows operating system, _______ command can be used in command prompt to check that the network adapter settings have been successfully changed.
- A) Troubleshoot
- B) Ping
- C) Ipconfig
- D) Ipcheck
In “Internet Protocol Version 4 (TCP/IPv4) Properties” window, the _______ radio button will be selected to enter the correct IP address.
- A) Use the embedded IP address
- B) Use the following IP address
- C) Use the internal IP address
- D) Use the same IP address
Windows will run __________ to verify the connection is good.
- A) Network Diagnostics
- B) Network Modeller
- C) Network Sniffer
- D) Network Designer
In _________ routing, there is no bandwidth usage between routers.
- A) Passive
- B) Alternative
- C) Static
- D) Dynamic
In _________ routing, administrator can allow routing access to specific networks.
- A) Passive
- B) Alternative
- C) Dual
- D) Static
Which of the following address is used to get packets from a network?
- A) Hardware
- B) Port
- C) Logical
- D) Physical
Which of the following is a routed protocol?
- A) POP
- B) IP
- C) RIP
- D) FTP
In ________ routing, there is no overhead on the router CPU.
- A) Static
- B) Passive
- C) Alternative
- D) Dynamic
________ routing technique uses manual configuration.
- A) Alternative
- B) Dynamic
- C) Passive
- D) Static
RIP is used by __________ device.
- A) Router
- B) Hub
- C) Repeater
- D) Amplifier
_____________ is not a routing protocol.
- A) IP
- B) OSPF
- C) EIGRP
- D) RIP
___________ protocols determine the method of packet delivery.
- A) Routed
- B) Routing
- C) Rolling
- D) Rated
In __________ routing technique, network parameters and environment are expected to remain constant.
- A) Passive
- B) Dynamic
- C) Static
- D) Alternative
Which of the following is a routing protocol?
- A) OSPF
- B) SMTP
- C) FTP
- D) IP
In ________routing all jobs are done automatically by routing protocol.
- A) Dynamic
- B) Direct
- C) Auto
- D) Static
_________ selects the best path for packet delivery from source to destination.
- A) Repeater
- B) Hub
- C) Amplifier
- D) Router
Which of the following is not feasible in large networks?
- A) Open Shortest Path First
- B) Dynamic routing
- C) Static routing
- D) Routing Information Protocol
Which of the following type of protocol determines the path of a packet through an inter-network?
- A) Rolling
- B) Rated
- C) Routed
- D) Routing
Which of the following address is used to deliver the packet from a router to the correct destination host?
- A) Port
- B) Logical
- C) Hardware
- D) IP