MCQ Bank
Which is correct syntax for display filter to filter out “Normal” Traffic to focus on anomalies in Wire shark?
- A) !ip.addr==10.1.1.1
- B) ip.addr =! 10.1.1.1
- C) ip.addr !== 10.1.1.1
- D) ip.addr != 10.1.1.1
To decrypt the data, you need a secret password specifically called as__________.
- A) Encryption Key
- B) Encryption Equation
- C) Frame Check Sequence
- D) Cyclic Redundancy Check
In ICMP packet of Type 5, code _______ refers to Redirect for host.
- A) 0
- B) 2
- C) 1
- D) None of the given
If IPv4 __________validation is disabled, there are no Expert Infos Errors in this trace file.
- A) CRC
- B) Checksum
- C) None of given
- D) Parity bit
Point to point protocol is _____________ layer protocol.
- A) Data Link
- B) Application
- C) Transport
- D) Session
The telephone generates analog signals ranging from ____________.
- A) 0 to 5000 Hz
- B) 0 to 8000 Hz
- C) 0 to 6000 Hz
- D) 0 to 4000 Hz
ICMP packet type _______ refers to route redirection.
- A) 9
- B) 3
- C) 4
- D) 5
In asymmetric routing, traffic flowing from host A to host B flows from ________ path as compared to traffic flowing from host B to host A.
- A) Different
- B) Same or different
- C) Exactly Same
- D) None of the given
Which one is first step to Create Filter Expression Buttons in Wire shark?
- A) Open tr-twohosts.pcapng
- B) Open tr-smbjoindomain.pcapng
- C) Open tr-winsize.pcapng
- D) Open tr-general.pcapng
In the context of networks, AAA stands for __________.
- A) Authentication, Authorization, and Accounting
- B) Atomicity, Authority and Accountability
- C) None of the given
- D) Authentication, Authorization, and Agility
In ICMP packet of Type 5, code _______ refers to Redirect for Network.
- A) 2
- B) None of the given
- C) 0
- D) 1
Amount of data that can be carried in a frame is limited by ___________.
- A) MTU
- B) CRC
- C) FCS
- D) TTL
In AAA model, ________ means the process of deciding what resources a particular user can access.
- A) Agility
- B) Authentication
- C) Accounting
- D) Authorization
Which one of the following statement is false about Wireshark software?
- A) It is not a network packet analyzer
- B) It captures network traffic
- C) It works on both Wireless or Wired network
- D) It is a network packet analyzer
Which one is first step to change the Dissector Behavior in Wire shark?
- A) Open tr-winsize.pcapng
- B) Open tr-general.pcapng
- C) Open tr-smbjoindomain.pcapng
- D) Open tr-youtubebad.pcapng
Port numbers can be reused without any problem if previous TCP connection is _____________.
- A) Initiated
- B) Terminated
- C) Active
- D) Open
Wireshark captures and decodes the network frames of any host running on __________.
- A) Wired Network only
- B) None of the given
- C) Either Wireless or Wired
- D) Wireless Network only
To apply a MAC address filter in Wire shark we will enter _________________.
- A) xx:xx:xx:xx:xx:xx Host ether
- B) xx:xx:xx:xx:xx:xx ether host
- C) Host ether xx:xx:xx:xx:xx:xx
- D) ether host xx:xx:xx:xx:xx:xx
Which of the following devices is not an interconnecting device?
- A) Router
- B) Switch
- C) None of the given
- D) Bridge
Which file will be opened to add coloring rule in Wire shark?
- A) tr-winsize.pcapng
- B) tr-smbjoindomain.pcapng
- C) tr-general.pcapng
- D) tr-chappellu.pcapng